galileo_epd_cal_ivo://pds-ppi/galileo_epd_cal_corrected_low_res/ppi/epn_corePlanetary Data SystemIn Sook MoonKollmann, P.2025-04-25T02:05:23Zpds operatorpds_operator@igpp.ucla.eduasteroid-dynamics These are reprocessed measurements by the Engergetic Particle Detector (EPD) instrument onboard the Galileo spacecraft that orbited Jupiter and measured intensities of ion and electron radiation in the keV and MeV energy range. This set is version 31 of reprocessing and version 1.0 of PDS delivery. Data in the low resolution files include measurements that are binned into channels responding to certain energy and species ranges. The files are comma separated. Invalid entries will have -1.000000E+38 as an entry. The first 4 lines of each data text file provide information on the channels included here: The first line of each file lists the names of the channels included. The second line lists the center energies of these channels in keV. The third line lists the channels again. The forth line lists the mass of the measured particle in AMU. Zero mass refers to electrons. The forth line in the data text file labels the columns that follow in the file. The columns include times, radiation measurements, spacecraft location, instrument look direction, and some supplementary information. Radiation measurements are provided both as best calibrated and cleaned intensities as well as raw, uncorrected count rates. Columns with channel names followed by a "j" include calibrated differential intensities of the given channel. If the value is negative, it should be ignored and particularly not included in averages. For the difference between -1.000000E+38 and all other negative values, see the User Guide. Columns ending with "f" provide differential intensities based on a combination of various channels. Columns ending with "i" include calibrated integral intensities. Columns with plain channel names describe the raw uncorrected count rate. Columns ending with "bg" are raw count rates measured behind the calibration shield. Each following line will provide the same data but for different times. More information can be found in the User Guide. This includes the full set of channels covering the full energy and species range of EPD. The time and pitch angle resolution is low. Higher resolution is available for some channels that can be found in the medium and high resolution files.the energy deposited in the one solid state detector (Energy_keV column) and the time of flight (TOF_ns) within the instrument are recorded.2000asqu.book.....Chttps://vo-pds-ppi.igpp.ucla.edu/tableinfo/galileo_epd_cal_corrected_low_res.epn_coreGeneralUniversityResearchAmateurIsServedByPDS-PPI VO server TAP servicehttps://vo-pds-ppi.igpp.ucla.edu/tapOpticalgalileo_epd_cal_corrected_low_res These are reprocessed measurements by the Engergetic Particle Detector (EPD) instrument onboard the Galileo spacecraft that orbited Jupiter and measured intensities of ion and electron radiation in the keV and MeV energy range. This set is version 31 of reprocessing and version 1.0 of PDS delivery. Data in the low resolution files include measurements that are binned into channels responding to certain energy and species ranges. The files are comma separated. Invalid entries will have -1.000000E+38 as an entry. The first 4 lines of each data text file provide information on the channels included here: The first line of each file lists the names of the channels included. The second line lists the center energies of these channels in keV. The third line lists the channels again. The forth line lists the mass of the measured particle in AMU. Zero mass refers to electrons. The forth line in the data text file labels the columns that follow in the file. The columns include times, radiation measurements, spacecraft location, instrument look direction, and some supplementary information. Radiation measurements are provided both as best calibrated and cleaned intensities as well as raw, uncorrected count rates. Columns with channel names followed by a "j" include calibrated differential intensities of the given channel. If the value is negative, it should be ignored and particularly not included in averages. For the difference between -1.000000E+38 and all other negative values, see the User Guide. Columns ending with "f" provide differential intensities based on a combination of various channels. Columns ending with "i" include calibrated integral intensities. Columns with plain channel names describe the raw uncorrected count rate. Columns ending with "bg" are raw count rates measured behind the calibration shield. Each following line will provide the same data but for different times. More information can be found in the User Guide. This includes the full set of channels covering the full energy and species range of EPD. The time and pitch angle resolution is low. Higher resolution is available for some channels that can be found in the medium and high resolution files.the energy deposited in the one solid state detector (Energy_keV column) and the time of flight (TOF_ns) within the instrument are recorded.galileo_epd_cal_corrected_low_res.epn_core These are reprocessed measurements by the Engergetic Particle Detector (EPD) instrument onboard the Galileo spacecraft that orbited Jupiter and measured intensities of ion and electron radiation in the keV and MeV energy range. This set is version 31 of reprocessing and version 1.0 of PDS delivery. Data in the low resolution files include measurements that are binned into channels responding to certain energy and species ranges. The files are comma separated. Invalid entries will have -1.000000E+38 as an entry. The first 4 lines of each data text file provide information on the channels included here: The first line of each file lists the names of the channels included. The second line lists the center energies of these channels in keV. The third line lists the channels again. The forth line lists the mass of the measured particle in AMU. Zero mass refers to electrons. The forth line in the data text file labels the columns that follow in the file. The columns include times, radiation measurements, spacecraft location, instrument look direction, and some supplementary information. Radiation measurements are provided both as best calibrated and cleaned intensities as well as raw, uncorrected count rates. Columns with channel names followed by a "j" include calibrated differential intensities of the given channel. If the value is negative, it should be ignored and particularly not included in averages. For the difference between -1.000000E+38 and all other negative values, see the User Guide. Columns ending with "f" provide differential intensities based on a combination of various channels. Columns ending with "i" include calibrated integral intensities. Columns with plain channel names describe the raw uncorrected count rate. Columns ending with "bg" are raw count rates measured behind the calibration shield. Each following line will provide the same data but for different times. More information can be found in the User Guide. This includes the full set of channels covering the full energy and species range of EPD. The time and pitch angle resolution is low. Higher resolution is available for some channels that can be found in the medium and high resolution files.the energy deposited in the one solid state detector (Energy_keV column) and the time of flight (TOF_ns) within the instrument are recorded.ivo://ivoa.net/std/epntap#table-2.0granule_uidInternal table row index, which must be unique within the table. Can be alphanumeric.meta.idcharindexedprimarygranule_gidCommon to granules of same type (e.g. same map projection, or geometry data products). Can be alphanumeric.meta.idcharobs_idAssociates granules derived from the same data (e.g. various representations/processing levels). Can be alphanumeric, may be the ID of original observation.meta.id;obschardataproduct_typeThe high-level organization of the data product, from a controlled vocabulary (e.g., 'im' for image, sp for spectrum). Multiple terms may be used, separated by # characters.meta.code.classcharnullabletarget_nameStandard IAU name of target (from a list related to target class), case sensitivemeta.id;srccharnullabletarget_classType of target, from a controlled vocabulary.src.classcharnullabletime_minAcquisition start time (in JD), as UTC at time_refpositiondtime.start;obsdoublenullabletime_maxAcquisition stop time (in JD), as UTC at time_refpositiondtime.end;obsdoublenullabletime_sampling_step_minSampling time for measurements of dynamical phenomena, lower limit.stime.resolution;stat.mindoublenullabletime_sampling_step_maxSampling time for measurements of dynamical phenomena, upper limitstime.resolution;stat.maxdoublenullabletime_exp_minIntegration time of the measurement, lower limit.stime.duration;obs.exposure;stat.mindoublenullabletime_exp_maxIntegration time of the measurement, upper limitstime.duration;obs.exposure;stat.maxdoublenullablespectral_range_minSpectral range (frequency), lower limit.Hzem.freq;stat.mindoublenullablespectral_range_maxSpectral range (frequency), upper limitHzem.freq;stat.maxdoublenullablespectral_sampling_step_minSpectral sampling step, lower limit.Hzem.freq;spect.binSize;stat.mindoublenullablespectral_sampling_step_maxSpectral sampling step, upper limitHzem.freq;spect.binSize;stat.maxdoublenullablespectral_resolution_minSpectral resolution, lower limit.spect.resolution;stat.mindoublenullablespectral_resolution_maxSpectral resolution, upper limitspect.resolution;stat.maxdoublenullablec1min(This data collection does not give coordinates)doublenullablec1max(This data collection does not give coordinates)doublenullablec2min(This data collection does not give coordinates)doublenullablec2max(This data collection does not give coordinates)doublenullablec3min(This data collection does not give coordinates)doublenullablec3max(This data collection does not give coordinates)doublenullables_regionObsCore-like footprint, valid for celestial, spherical, or body-fixed framespos.outline;obs.fieldcharnullablec1_resol_min(This data collection does not give coordinates)doublenullablec1_resol_max(This data collection does not give coordinates)doublenullablec2_resol_min(This data collection does not give coordinates)doublenullablec2_resol_max(This data collection does not give coordinates)doublenullablec3_resol_min(This data collection does not give coordinates)doublenullablec3_resol_max(This data collection does not give coordinates)doublenullablespatial_frame_typeFlavor of coordinate system, defines the nature of coordinates. From a controlled vocabulary, where 'none' means undefined.meta.code.class;pos.framecharnullableincidence_minIncidence angle (solar zenithal angle) during data acquisition, lower limit.degpos.incidenceAng;stat.mindoublenullableincidence_maxIncidence angle (solar zenithal angle) during data acquisition, upper limitdegpos.incidenceAng;stat.maxdoublenullableemergence_minEmergence angle during data acquisition, lower limit.degpos.emergenceAng;stat.mindoublenullableemergence_maxEmergence angle during data acquisition, upper limitdegpos.emergenceAng;stat.maxdoublenullablephase_minPhase angle during data acquisition, lower limit.degpos.phaseAng;stat.mindoublenullablephase_maxPhase angle during data acquisition, upper limitdegpos.phaseAng;stat.maxdoublenullableinstrument_host_nameStandard name of the observatory or spacecraftmeta.id;instr.obstycharnullableinstrument_nameStandard name of instrumentmeta.id;instrcharnullablemeasurement_typeUCD(s) defining the data, with multiple entries separated by hash (#) characters.meta.ucdcharnullableprocessing_levelDataset-related encoding, or simplified CODMAC calibration levelmeta.calibLevelintcreation_dateDate of first entry of this granuletime.creationcharnullablemodification_dateDate of last modification (used to handle mirroring)time.processingcharnullablerelease_dateStart of public access periodtime.releasecharnullableservice_titleTitle of resource (an acronym really, will be used to handle multiservice results)meta.titlecharnullabletime_scaleDefaults to UTC in data services; takes values from http://www.ivoa.net/rdf/time_scale otherwisetime.scalecharnullablepublisherA short string identifying the entity running the data service usedmeta.curationcharnullablebib_referenceBibcode or DOI preferred if available, or other bibliographic identifier or URLmeta.bibcharnullableaccess_urlURL of the data file, case sensitive. If present, then access_format and access_estsize are mandatory.meta.ref.url;meta.filecharnullableaccess_estsizeEstimated file size in kbyte.kbytephys.size;meta.fileintnullableaccess_formatFile format type (RFC 6838 Media Type a.k.a. MIME type)meta.code.mimecharnullabledatalink_urlDatalinks and services for this objectmeta.ref.urlcharnullable